The “Smart” Solution for Controlling Entry-Level Residential Applications The controller for entry-level residential applications offers simple operation with “smart” Solar Sync compatibility. 
  
With an easily configurable controller for up to 8 stations and 3 programs with 4 start times each, the X-Core is the perfect solution for residential applications. 
  
Simply install the revolutionary Solar Sync ET sensor and the X-Core becomes a “smart controller” that adjusts irrigation times based on local weather conditions. 
  
For quick and wireless irrigation start, the X-Core is also compatible with Hunter’s wireless remote controls. 
  
Designed to provide optimum efficiency and reliability, installation, operation and maintenance are simple.
Application: Residential
Number of stations: 2, 4, 6, 8
Type: Fixed

FEATURES
  
Number of stations: 2, 4, 6, 8
  
Type: Fixed
  
Enclosure: Indoor and outdoor
  
Number of independent programs: 3
  
Number of start times per program: 4
  
Max. run time: 4 hours
  
Warranty period: 2 years
EASY RETRIEVE™ MEMORY
Manual backup facility that memorizes all controller programming and retains setup information. This allows the saved irrigation program to be retrieved at any time. Used to reset the controller to its original settings after a mix-up or when a new season begins.

QUICK CHECK™
Quick Check feature allows quick detection of field wiring errors at the push of a button. Quick Check displays an ERR message when a short circuit is detected in the field wiring at a specific station number.

INTER-STATION DELAY
Provides a station-to-station watering delay when the controller moves from one station to another. The delay can range from a few seconds (to allow time for slow-closing valves to close) to a much longer period (to allow pressurized tanks, etc., to refill).

PERMANENT MEMORY
This feature protects against unhealthy utility lines. Stores time, date and program data. Available on all Hunter Controllers.

SEASONAL ADJUSTMENT
This feature allows quick adjustment of irrigation run times on a percentage scale. In the middle of the season, set the seasonal adjustment to 100% for all usage. If weather conditions require less water, enter the appropriate percentage (for example, 50%) to reduce irrigation run times and eliminate the need to adjust each station individually in the program. Hunter offers 3 different ways to use Seasonal Adjustment to reduce water usage. General, Monthly, Daily

General: Provides a seasonal adjustment value for all controller programs (available on most Hunter controllers)
Daily (Solar Sync ET sensor): Applies an automatic daily adjustment based on measured local weather conditions (available on most Hunter controllers)

AUTO SHORT CIRCUIT PROTECTION
Automatic short circuit protection is a feature on all Hunter controllers that operate on AC power. This feature automatically detects electrical faults, usually caused by wiring problems. Stations that have a short detected are skipped, allowing irrigation to continue at stations that have not detected a fault. There is no fuse to blow or internal circuit breaker to trip, so irrigation is not completely disabled.

PROGRAMMABLE RAIN DELAY
The programmable Rain Delay feature keeps the controller off for a user-specified number of days, and then automatically allows the system to return to programmed irrigation. This prevents watering during extended periods of rain, then automatically resumes watering without having to return to the controller. The controller displays the number of days remaining to continue watering.

SENSOR PROGRAMMABILITY
The ability to specify which program will be stopped in response to a specific sensor alarm. This allows programs that are not affected by the sensor to continue operating automatically.